ceramic filter-manufacture,factory,supplier from China

ETON HPMC can make the honeycomb ceramic product have a very dense internal structure after combustion.The addition of ETON HPMC in the honeycomb ceramic has an obvious effect on the shape preservation of the green tire, which can ensure the dimensional accuracy of the product, ensure the uniformity of the wall thickness, and reduce the rejection rate.Specification           TypeItemHPMCMethoxy %28.0～30.0Hydroxypropyl %7.0～12.0Gel temperature ℃58.0～64.0Viscosity mPa.s4000,6000,8000,10000pH5.5～8.0Loss on drying %≤4.

ETON cellulose ether can make the honeycomb ceramic product have a very dense internal structure after combustion.The addition of ETON cellulose ether HPMC in the honeycomb ceramic has an obvious effect on the shape preservation of the green tire, which can ensure the dimensional accuracy of the product, ensure the uniformity of the wall thickness, and reduce the rejection rate.Specification           TypeItemHPMCMethoxy %28.0～30.0Hydroxypropyl %7.0～12.0Gel temperature ℃58.0～64.0Viscosity mPa.s4000,6000,8000,1

The role of cellulose ether in honeycomb ceramics is very important.

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface&

Honeycomb ceramics are widely used in power generation, desulfurization and denitrification, and automobile exhaust gas treatment. With the advancement of technology, more and more thin-walled honeycomb ceramic technology is used.

ETON HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

ETON HPMC(Hydroxypropyl methyl cellulose) is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

Cellulose ether, especially hydroxypropyl methyl cellulose ether (HPMC), is an important component in commercial mortar. The effects of cellulose ether on cement-based materials include water retention, thickening, air entrainment and retardation, which are excellent in giving commercial mortar. At the same time, it also affects the macro and micro structure of cement hydration products, thus affecting the mechanical properties of commercial mortar. Cellulose ethers are usually divided into two categories: surface modification and non-surface modification.

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface treatmentPD100MPD150MPD200MPK40M PK100M&

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface&

Appearance is White to slightly off-white fibrous or granular powder.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

ETON Hydroxypropyl starch ether is a kind of chemical modified starch mainly used as thickener and texturing agent for cement or gypsum based mortar products. Hydroxypropyl starch ether is used for construction.ETON HPS is a cost-saving material and is easy to obtain the required thickening.