shandong head-manufacture,factory,supplier from China

HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as&nb

MELLUTEL™  YT-100MEHydroxyethyl Methyl Cellulose (HEMC) Product Description                                                                                      

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution. The degree of substitution and modification of substituent, allows the different chemical properties and benefits after alkalization and etherification reactions with Sodium hydroxide,Cholromethane,and ethylene oxide.HEMC is better performance in terms of higher gel temperature and hydrophilicity rely on ethyl substituent groups.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(C

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

 Tile cement mortar is used to attach tiles on concrete or block walls.

 Tile cement mortar is used to attach tiles on concrete or block walls.

Honeycomb ceramics are widely used in power generation, desulfurization and denitrification, and automobile exhaust gas treatment. With the advancement of technology, more and more thin-walled honeycomb ceramic technology is used.

MELLUTEL™ PCH200MS is a white or off-white powder, odorless, tasteless and non-toxic. Soluble in a mixture of cold water and organic solvents to form a transparent viscous solution.

Hydroxypropyl Methyl Cellulose products have the maximum consumption in the area of suspension polymerization of vinyl chloride in China. In the suspension polymerization of vinyl chloride, the dispersed system has a direct impact on the product, PVC resin, and on the quality of its processing and products. Hydroxypropyl Methyl Cellulose helps to improve the thermal stability of resin and control the particle size distribution(in other words, adjust PVC density), and its amount accounts for 0.025% -0.03% of PVC production.

HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries.

Hydroxypropyl Methyl Cellulose products have the maximum consumption in the area of suspension polymerization of vinyl chloride in China. In the suspension polymerization of vinyl chloride, the dispersed system has a direct impact on the product, PVC resin, and on the quality of its processing and products. Hydroxypropyl Methyl Cellulose helps to improve the thermal stability of resin and control the particle size distribution(in other words, adjust PVC density), and its amount accounts for 0.025% -0.03% of PVC production.

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula               &n

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

      MELLUTEL™ E5Hydroxypropyl Methyl Cellulose (HPMC) Product DescriptionMELLUTEL™ E5 is a non-ionic, dissolving in cold or hot water.

MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance. It can be used together with cellulose ether to improve the thickening features of cellulose- ethers used for products in the construction industry like plaster, filler and tile-adhesive etc.Application Data Presentation

Feature：The properties of thickening, binding, dispersing, emulsifying, film-forming, suspending, adsorbing, gelling, surface active, retaining moisture and protective colloid.Function：It has excellent enzyme resistance and emulsion stability.Formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Specific application and viscosity range                    ViscosityApplication60YT HPMC65YT HPMC75YT HPMCCreamy Cream and Desserts 4000 / /Baked goods50, 4000/4000Fried food50, 400050100, 4000Seasoning/Sauce50, 40

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Appearance is White to slightly off-white fibrous or granular powder.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Appearance is White to slightly off-white fibrous or granular powder.

Appearance is White to slightly off-white fibrous or granular powder.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.